INNOWALK PRO
Self Service

Pre-check

Pre-Check is to be executed daily before use to enable safe usage. 
Details regarding use, precautions and maintenance is found in the user manual.

You should always check the following: 
Daily Pre-check: Daily, before use, the following shall be checked by the caretaker.
Monthly Pre-check: Once a month the following is to be checked by the caretaker.

DAILY PRE-CHECK

1 // Belts

Check that all belts are intact and without visible damages, and that all seams are intact.  Check that Velcro locks well.

2 // Back attachment to seat

Push the back column in all 4 directions and check that the attachment is tight, and the attachment point is without damages.

MONTHLY PRE-CHECK

1 // Belts

Check that all belts are intact and without visible damages, and that all seams are intact.  Check that Velcro locks well.

2 // Chest & Hip support

Hold on to both chest supports, and then try to push, pull and rotate the supports in all directions.
Repeat on the hip supports. Check that all parts sit tight.

3 // Back attachment to seat

Push the back column in all 4 directions and check that the attachment is tight, and the attachment point is without damages.

4 // Guide-strap

Check that the guide straps are intact and without visible damages, and that all seams are intact.  

5 // Leg support

Check that the guide straps are intact and without visible damages, and that all seams are intact.  

6 // Electrical system

Check that no cables, buttons or electrical parts are damaged.

7 // Covers

Check that the covers are without cracks or holes.

8 // Remote control

Check that the remote housing is without any cracks or holes. Check that the remote cable is without damages.

9 // Strange sounds

Check that there are no dissonance, strange sounds or metal friction sounds in the electrical or mechanical system.

When maintenance is needed:

If any abnormalities, errors or damages are discovered during the pre-check, the product must be fixed before used again. Contact your Made for Movement representative to plan inspection, maintenance and/or repair of the product. See chapter Inspection and Maintenance in the user manual for details.